Boonton Satellite 55 Series Demonstration
Show measurement fidelity and speed of the Boonton 55 series wideband USB sensor powered by Real Time Power Processing™. Never miss a waveform! CCDF enables measurement of LNA or PA amplifier compression mapping it to system performance such as BER.
New Real-Time USB Peak Power Sensor with CCDF
Capture every pulse to assure signal integrity and see signal compression
Boonton 55 Series Demonstration
Product: Show measurement fidelity and speed of the Boonton 55 series wideband USB sensor powered by Real Time Power Processing™. Never miss a waveform! CCDF enables measurement of LNA or PA amplifier compression mapping it to system performance such as BER.
Anyone measuring and characterizing fast edge pulsed RF signals with particular interest in observing and measuring intermittent behavior of a pulse, as well as characterizing the pulse edges with a fine resolution timescale power meter. Anyone designing, testing and characterizing wideband and high dynamic range amplifiers using modulation schemes like OFDM, QPSK and QAM for 4G/LTE, WiFi and other applications for satellite communications, enabling scalar analyzer measurements* such as gain, input and output return loss.
Typical Satellite System:
About 55 Series Wideband USB sensor:
Key benefits of the Boonton 55 Series wideband USB peak power sensor are processing speed, trigger stability & accuracy. The revolutionary Real Time Power Processing™ technology features 125 times better time resolution (100 picoseconds) than the competition as well as the widest video bandwidth, rise-time and fastest sampling rates. Multi-channel capability allows monitoring input and output signal of DUT amplifier. Using CCDF, compression and peaks can be measured.
|- Ultrafast rise time: 4 ns*
- Time resolution: 100 ps
- Effective Sample Rate: 10 Gsamples/sec
- Class leading Video Bandwidth: >125 MHz**
- Multi channel capability
|- Statistical Measurements: 100 Mpoints/sec
- Trace acquisition speed: >100K sweeps/sec
- Real Time Measurements: no latency due to
buffer processing by host PC
|*when used in conjunction with couplers and test software
||** for 55006 model only
Measuring fast edges and intermittent events and dynamic waveforms:
Our demo box is comprised of a fast RF switch with its control line pulsed at 1kHz for 10 µs with an intermittent dropout glitch occurring at 20Hz (once every 50 pulses). The input signal to the switch is a 2 GHz CW tone. The test signal for CCDF is a 20 MHz bandlimitted OFDM like signal driving an DUT amplifier with its input and output monitored to measure compression characteristics. When measured during BER or MER testing CCDF provides an intuitive graphical display in characterizing the amplifier and mapping its performance to BER.
|Fig.1: Rising edge of a pulse
||Fig.2: Observing pulse with a glitch
||Fig.3: Input & output CCDF distributions to show amplifier compression
Fig.1 Shows the rising edge of the pulse highlighting fast rise-time (3 ns), edge fidelity and trigger stability of the 55 Series of 5 ns/div.
Fig.2 Shows superior performance of Boonton's Real Time Power Processing™ (RTPP) technology for reliably capturing dynamic waveforms. The conventional sensors miss many of the pulses with the dropout (glitch) due to their lengthy processing time when acquisition is halted. The Boonton 55 Series acquires the signal continuously with no gaps, and re-arms immediately.
Fig.3 Displays CCDF curves of input and output signals and compression characteristics of an amplifier for spread spectrum signal. Increasing the input power to the amplifier starts to compress the rare peaks (0.0001%) initially but as the input power is increased compression will occur also at 0.001% and 0.01%, and so on.
Existing and Comparable Products:
- Replace systems that require crystal detector, a digital oscilloscope, a spectrum analyzer, an average power meter, and assorted connectors & couplings to monitor a single output.
- Dual channel 55series complements the simultaneous measurements of forward & reflected power (Return Loss), and amplifier input & output (Gain)
- Complements Boonton's existing peak power meter family products.